This guide explains how to change the selection criteria (operator and value) of a filter that has already been added to your report configuration.
Procedure to Modify a Filter
1. Access the Filters Section
Scroll down to the Configurazione panel (which appears after selecting a data source) and locate the section titled Filtri.
2. Select the Filter to Modify
Active filters are displayed as chips. Click on the label of the filter you want to modify (for example, NomeCampo = Valore).
3. Configure the Filter
A modal window titled Configura filtro will open. Here you can define the new search parameters:
- Operatore: Select the desired comparison type (e.g., Uguale a, Diverso da, Contiene, Maggiore di, Minore di).
- Valore: Enter the new value that the system should look for.
4. Save Changes
Click the Salva button inside the modal window.
5. Refresh the Report
Once saved, the report will update automatically (or after a short delay) to apply the new filter criteria, displaying updated data in the preview area.
> Nota: If the report does not update immediately, you can force a recalculation by clicking on the Aggiorna button (<i class="fa fa-refresh"></i> Aggiorna) located in the main header.
