This guide shows you how to apply one or more filter conditions to the data displayed in your report.
Procedure
1. Access the Configuration: Make sure you are in the report configuration mode (the left sidebar shows sections like Columns / Dimensions, Metrics (Values), etc.).
2. Locate Filters: In the left sidebar, scroll down to the section titled Filters.
3. Add a Filter Field: Click on the + (Add) icon next to the Filters label.
4. Select Fields: The sidebar will change view and display the list of available fields under the title Select fields.
- Check the box next to the field or fields you want to use as a filter.
- If necessary, use the search box (Search field...) to quickly find the desired field.
5. Confirm Selection: Click the Confirm button at the bottom of the sidebar.
6. Configure Filter Logic: A dialog window (pop-up) will appear for each field you selected. In this window:
- Select the Operator that defines the condition (for example,
=for "equals",LIKEfor "contains", orBETWEENfor date ranges). - Enter the specific Value that the filter should look for.
7. Save the Filter: Click the Save button in the dialog window to apply the condition.
8. View Results: Once all filters are configured, the report will automatically update on the main screen to show only data that meets the set conditions.
> Tip: Active filters are listed under the Filters section in the sidebar. You can click on an existing filter to modify its operator or value, or click on the X icon to remove it.
