This guide shows you how to safely save all the changes made to your article within the editing area.
Saving Procedure
After completing the changes in the different sections of the article (Generali, Immagini, SEO), follow these steps to ensure that the data is saved correctly.
1. Check mandatory fields: Make sure you have filled in all fields marked with an asterisk (*). Mandatory fields include:
- Article Title
- Slug
- Content
2. Review main settings (Generali Section):
- If you want the article to be immediately visible on the site, make sure the Mostra sul sito checkbox is checked.
- If the article should be highlighted, make sure the Metti in evidenza checkbox is checked.
- Check the Data di pubblicazione and any Scadenza.
3. Navigate through sections: If you used the tab interface (Generali, Immagini, SEO), verify that you have completed all necessary changes in each section.
4. Perform saving: Look for the save button (usually located in the top toolbar or at the end of the editing form) and click it.
Note: The save action will send all modified data to the system.
5. Confirm: Once saving is complete, the system will provide you with a success notification. If saving was successful, you will receive a confirmation message.
> Important: If the system reports "mandatorydatamissing", go back and fill in the Title, Slug, and Content fields before trying to save again.
